Epicshot Whirl Wing Automatic Trap Clay Thrower - 25 Target Feeder Up To 80 Yards #ww1
$695.00
VIP Specials Click to view details
or 4 payments of $173.75 with Info
$695.00
VIP Specials Click to view details
or 4 payments of $173.75 with Info
RRP $275.00 $198.48
VIP Specials Click to view details
or 4 payments of $49.62 with Info
$49.00
VIP Specials Click to view details
or 4 payments of $12.25 with Info
$39.50
VIP Specials Click to view details
or 4 payments of $9.88 with Info
$459.00
VIP Specials Click to view details
or 4 payments of $114.75 with Info
RRP $187.50 $159.00
VIP Specials Click to view details
or 4 payments of $39.75 with Info
Cleans brass cases well.
John Roche andyman024139117 January 2019As far as affordable vibrating tumblers go, this one works great for cleaning brass cases. With crushed walnut media, you get a lot of dust. Walnut media cleans well but the brass doesn't come out shiny. There's almost no dust with crushed corn cob media and it cleans well too and the brass comes out shiny. If you want it polished, add some polish. The cases come out clean using either dry media. If you remove primers prior to cleaning, the primer holes won't be as clean as using wet media with steel pins and little pieces of the dry media get stuck in the primer pocket and flash holes. They are easily removed with a small pin punch or compressed air.
(5)
$99.00
VIP Specials Click to view details
or 4 payments of $24.75 with Info
RRP $444.50 $377.50
VIP Specials Click to view details
or 4 payments of $94.38 with Info
Hoppe’s 9 foam clearer Best bore cleaner!
Cailem Jenkins 165650526585 April 2021Easy to use and lasts a long time!
(5)
Thumbs up
Cailem Jenkins 1656505265823 January 2020Works a treat. I spray after shooting on a sat arvo, plug the barrel and leave overnight. Gets all the copper out and most of the carbon, first go!
(5)
RRP $56.50 $48.00
VIP Specials Click to view details
or 4 payments of $12.00 with Info
RRP $481.50 $368.10
VIP Specials Click to view details
or 4 payments of $92.03 with Info
Rifle Case
Antonio d'Assumpcao tluiz33171827059 June 2023This thing is a beast! Definitely not a lightweight and if flying with it and guns will almost certainly make it eligible for excess baggage Haven't tried dunking it in a pond to test waterproof but well constructed, sturdy and will hold two of my rifles securely with it's customisable pluck foam. Securing latches on each end as well as 5 at front was an unexpected bonus. Locking holes for 2 padlocks (although being plastic this is more to stop children from getting in rather than deterring a determined thief). Very happy with this purchase
(5)
RRP $295.00 $225.00
VIP Specials Click to view details
or 4 payments of $56.25 with Info
$59.00
VIP Specials Click to view details
or 4 payments of $14.75 with Info
$7.00
VIP Specials Click to view details
or 4 payments of $1.75 with Info
From $99.50
VIP Specials Click to view details
or 4 payments of $24.88 with Info
RRP $195.00 $132.40
VIP Specials Click to view details
or 4 payments of $33.10 with Info
$203.50
VIP Specials Click to view details
or 4 payments of $50.88 with Info
RRP $73.00 $62.00
VIP Specials Click to view details
or 4 payments of $15.50 with Info
RRP $221.95 $193.00
VIP Specials Click to view details
or 4 payments of $48.25 with Info
The Celestron Heavy-Duty Alt-Azimuth Tripod is really useful when you want to do hand’s-free viewing through giant binoculars or a spotting scope. It is also a nice match for small to medium-sized telescopes, like the Celestron C90 or C5.
The aluminum legs of the Celestron Heavy-Duty Alt-Az Tripod are fully adjustable to best match the height you require. Minimum height is 32 inches, and the maximum extended height is 45 inches. A center brace stabilizes the legs in place when the tripod is open, and a metal accessory tray is fitted to the center of the brace, or spreader bars, allowing you to store a few accessories close at hand.
The alt-azimuth tripod head is made of metal and is controlled in two ways. To make large adjustments in altitude, simply grab the mount and move it to the desired location. A friction clutch installed in the head will hold it in position. Large movements in azimuth can be achieved by loosening the azimuth lock and then manually moving the mount. It can spin 360º with the lock disengaged. Small movements are best made by turning the slow motion control handles. They work great for following objects as they move across the night sky.
Equipment is mounted on the alt-az tripod head by a 1/4”- 20 thread mounting bolt that is captured in the mounting plate. The mounting bolt is free to slide along a slot cut in the mounting plate, allowing the user to adjust the forward and aft location of the telescope, spotting scope, binocular mount adapter, or camera. The purpose here is to keep your equipment centered over the tripod as best you can. Refractor telescopes and cameras with long lenses will be less stable if they sit too far forward, so the ability to make adjustments to the balance point is a nice option.
(CL98100LP)
SKU | CL98100LP |
Model # | 93607 |
Barcode # | 050234936071 |
Brand | Celestron |
Shipping Weight | 4.8800kg |
Shipping Width | 0.200m |
Shipping Height | 0.200m |
Shipping Length | 0.935m |
Service
Copyright © 2024 Xhunter Australia
ABN: 29166184809
Add your favourites to cart
Select Afterpay at checkout
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms